INTERNAL SOLUTIONS > Metal ceiling tile systems LAY-IN- LAY- ON
Metal ceiling tile systems
LAY-IN- LAY- ON
The 600×600 mm false ceiling panels are the most versatile module for creating false ceilings and it is for this reason that they are used all over the world.
Metalscreen Boxer tile systems dimensions mm.600×600 Lay-In & Lay On exposed T24-15 mm. T suspension grid systems provide easy access to the plenum, suitable where regular access is required. The most functional easiest and fastest ceiling system to install by lifting and shifting the tiles. Metalscreen ceiling tiles available with multiple options of edges Board flat, Tegular reveal depth h mm.9-35 mm., Flush same level of T bar To improve interior sound control Metalscreen panels can be realized with micro-perforation patterns holes diameter mm.2-3 diagonal open area 11%-22% Total and Central surface mm.400×400 with mm.100 plain border to assure maximum flatness and stability of the tiles. High acoustical performance of comfort noise control Boxer micro perforated panels are providedwith a special sound-absorbing nonwoven tissue thermo-glued on the back. Highest quality stove-enamelled continuos coil coating process of aluminium incombustible Euroclass A1 100% recyclable washable ,humidity resistant saltiness corrosion-proof and pre-coated steel. Wide range of colours and finishes are available: RAL colors – WOOD LIKE wood effect – OXIDAL anodized effect brushed surface – ULTRA MATT high matt metallic surface. The plus feature of this ceiling system is the simplest installation and not require tools or fasteners. Easy cleaning. Refitting to substitute an old ,dirty and dangerous carcinogenic mineral fibers panels simply replacing a new care ceilingon the same T grid conventional suspension with our metal tiles.
Panel systems
Type BOXER SK BOARD
Aluminum Technical Specification Guidelines
Inspectable sound-absorbing false ceiling Type METALSCREEN BOXER SK BOARD made with flat ceilings module size 600×600 made of pre-painted aluminum Coil Coating alloy 3105-h46-48 thickness 0.5-0.6 mm Non-combustible solid or micro-perforated diagonal surface diameter 2-mm 3 Total anti-occlusion – Central 400×400 mm with full edge 100 mm – Decorative geometric with acoustic TNT, black sound-absorbing non-woven fabric applied on the back. Color chart RAL – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish – ULTRA MATT super matt metallic finish. Sublimation processes, adhesive films, powder paints, photo-imprinting are NOT permitted (thickness, colour, finish and drilling chosen by the works management). The ceiling lights will be mounted flush with the 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with reverse T section. 24xh38 mm base on all components in galvanized steel. Single anti-torsion body with anti-detachment snap. Rivets and exposed tabs covered with pre-painted aluminum foil, washable, rot-proof, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made with a perimeter frame type METALSCREEN RA section L mm.24×24 with bayonet coupling and reinforcement rib made of pre-painted aluminum in the same color as ceilings or following indications from the Works Management with compensation bands in coated plaster to avoid manual cutting and waste to maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24xh38x3600 mm, exposed cladding in pre-painted aluminum in the standard color White RAL 9003.
Steel Technical Specification Guidelines
Inspectable sound-absorbing false ceiling Type METALSCREEN BOXER SK BOARD made with flat ceilings module size 600×600 mm made of pre-painted galvanized steel Coil Coating thickness 0.5 mm Fireproof smooth or micro-perforated surface diagonal diameter 2-3 mm anti-occlusion Total – Central 400×400 mm with full edge 100 mm – Decorative geometric with back-applied acoustic TNT sound-absorbing non-woven fabric. Standard color Sanitas White RAL 9003 – Silver Gray RAL 9006. Powder coatings are NOT permitted (color and drilling chosen by the Works Management). The ceiling lights will be mounted flush with the 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with reverse T section. 24xh38 mm base on all components in galvanized steel. Single anti-torsion body with anti-detachment snap. Rivets and exposed tabs covered with pre-painted aluminum foil, washable, rot-proof, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made with a perimeter frame type METALSCREEN RA section L mm.24×24 with bayonet coupling and reinforcement rib made of pre-painted galvanized steel in the same color as ceilings or following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting and scrap to maintain a symmetrical 600×600 mm module delimited by a 24xh38x3600 mm inverted T profile, exposed cladding in pre-painted aluminum in the standard color White RAL 9003.
Type BOXER VT-9 TEGULAR
Aluminum Technical Specification Guidelines
Inspectable false ceiling Type METALSCREEN BOXER VT-9 TEGULAR made with semi-recessed ceiling lights module size mm.600x600xh9 bevelled edge made of pre-painted aluminum Coil Coating alloy 3105-h46-48 thickness mm.0.5 – 0.6 Fireproof solid or diagonal micro-perforated surface diameter 2-3 mm total anti-occlusion – Central 400×400 mm with full edge 100 mm – Decorative geometric with acoustic non-woven non-woven black sound-absorbing fabric applied on the back. Color chart RAL – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish – ULTRA MATT super matt metallic finish. Sublimation processes, adhesive films, powder paints, photo-imprinting are NOT permitted (thickness, colour, finish and drilling chosen by the Works Management). The ceiling lights will be mounted in a lowered position on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with reverse T section. 24xh38 mm base on all components in galvanized steel. Single anti-torsion body with anti-detachment snap. Rivets and exposed tabs covered with pre-painted aluminum foil, washable, rot-proof, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made with a perimeter frame Type METALSCREEN RA section L mm.24×24 with bayonet connection and reinforcement rib – Type METALSCREEN SM9 section Double L mm.19x9x9x19 made of pre-painted aluminum in the same color as ceilings or following the indications of the Works Management with bands of compensation in coated plaster to avoid manual cutting and waste and maintain a symmetrical 600×600 mm module delimited by the 24xh38x3600 mm inverted T profile, exposed cladding in pre-painted aluminum in the standard color White RAL 9003.
Steel Technical Specification Guidelines
Type BOXER VT-15 MICROLOOK
Aluminum Technical Specification Guidelines
Steel Technical Specification Guidelines
Type BOXER FLUSH VT-FLAT
Aluminum Technical Specification Guidelines
Inspectable sound-absorbing false ceiling Type METALSCREEN BOXER FLUSH VT FLAT made with flat ceilings module size 600×600 mm made of pre-painted aluminum Coil Coating alloy 3105-h46-48 thickness 0.5 – 0.6 mm Non-combustible solid or micro-perforated diagonal surface diameter 2 -3 Total anti-occlusion – Central 400×400 mm with full edge 100 mm – Decorative geometric with acoustic TNT, black sound-absorbing non-woven fabric applied on the back. Color chart RAL – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish – ULTRA MATT super matt metallic finish. Sublimation processes, adhesive films, powder paints, photoimprinting are NOT permitted (thickness, colour, finish and drilling chosen by the works management). The ceiling lights will be mounted in coplanar support on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with reverse T section. 24xh38 mm base on all components in galvanized steel. Single anti-torsion body with anti-detachment snap. Rivets and rivets are NOT permitted. exposed tabs covered with pre-painted aluminum foil, washable, rot-proof, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made with perimeter frames Type METALSCREEN RA section L mm.24×24 with bayonet coupling and reinforcement rib made of pre-painted aluminum in the same color as ceilings or following indications from the Works Management with compensation bands in coated plaster to avoid manual cutting and waste to maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24xh38x3600 mm, exposed cladding in pre-painted aluminum in the standard color White RAL 9003.
Steel Technical Specification Guidelines
Type BOXER VT-24 DEEP TEGULAR
Technical Specification Guidelines
Type BOXER REVERSE VT-24 DEEP TEGULAR 3D
Technical Specification Guidelines
Inspectable false ceiling Type METALSCREEN BOXER REVERSE VT-24 DEEP TEGULAR 3D made with semi-recessed coffered ceiling lights module size mm.600x600xh35 oblique edge made of pre-painted galvanized steel Coil Coating alloy 3105-h46-48 thickness mm.0.5 – 0.6 Incombustible surface solid or micro-perforated diagonal diameter 2-3 mm anti-occlusion Total – Central 400×400 mm with full edge 100 mm – Decorative geometric with acoustic non-woven black sound-absorbing non-woven fabric applied on the back. Color chart RAL – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish. Sublimation processes, adhesive films, powder paints, photo-imprinting are NOT permitted (thickness, colour, finish and drilling chosen by the Works Management). The ceilings will be mounted in lowered support UP-DOWN solution 1 DOWN – raised solution 2 UP alternating according to the installation scheme of the Works Management on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Non-combustible Euroclass A1 with reverse T section on base 24xh38 mm on all the components in galvanized steel, single anti-torsion body with anti-unhooking snap. Rivets and attached tabs are NOT allowed. Visible covering with pre-painted, washable, rot-proof, anti-yellowing aluminum foil. 100% humidity and salt corrosion resistance. Lead-chrome free. Standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting and waste and maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24xh38x3600 mm exposed clad in pre-painted aluminum in the standard color White RAL 9003.
Type TRIPLEX/1 BASTONCINO
Aluminum Technical Specification Guidelines
Inspectable decorative sound-absorbing false ceiling Type METALSCREEN TRIPLEX/1-VT9-VT15-SK BASTONCINO made with semi-recessed ceiling lights module size 600x600xh9 mm with 16 rectangular slots size 15×110 mm pass-throughs or with non-woven acoustic non-woven black sound-absorbing fabric applied on the back. Made of pre-painted aluminum Coil Coating thickness 0.5 – 0.6 mm RAL color chart – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish – ULTRA MATT super matt metallic finish. Sublimation processes, adhesive films, powder paints, photo-imprinting are NOT permitted (thickness, color and finish chosen by the works management). The ceiling lights will be mounted in a lowered position on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with inverted T section base 24 – 15 mm (base width chosen by the Works Management) x h38 on all steel components galvanized single anti-torsion body with anti-unhooking snap. Rivets and tabs NOT allowed, exposed covering with pre-painted washable rot-proof aluminum foil, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and Type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric adjustment. Side finishes created following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting, waste and maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24-15xh38x3600-3000 mm covered in pre-painted aluminum in the standard color White RAL 9003.
Steel Technical Specification Guidelines
Inspectable decorative sound-absorbing false ceiling Type METALSCREEN TRIPLEX/1-VT9-VT15-SK LAY-IN BASTONCINO made with semi-recessed ceiling lights module size 600x600xh9 mm with 16 rectangular slots size 15×110 mm pass-throughs or with acoustic non-woven black sound-absorbing non-woven fabric applied back-applied in pre-painted galvanized steel Coil Coating thickness 0.5 mm Standard color Sanitas white Ral 9003 – Silver gray RAL 9006. Powder coating, photo-imprinting NOT permitted (thickness, color and finish chosen by the Works Management). The ceiling lights will be mounted in a lowered position on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with inverted T section base 24 – 15 mm (base width chosen by the Works Management) x h38 on all steel components galvanized single anti-torsion body with anti-unhooking snap. Rivets and attached tabs NOT allowed. Visible covering with pre-painted, washable, rot-proof, anti-yellowing aluminum foil. 100% humidity and salt corrosion resistance. Lead-chrome free. Standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting and waste and maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24-15xh38x3600-3000 mm exposed cladding in standard color pre-painted aluminium. White RAL 9003.
Type TRIPLEX/2 FINESTRELLA
Aluminum Technical Specification Guidelines
Inspectable decorative sound-absorbing false ceiling Type METALSCREEN TRIPLEX/2-VT9-VT15-SK FINESTRELLA made with semi-recessed ceiling lights module size 600x600xh9 mm with 16 openings size 110×110 mm pass-throughs or with acoustic TNT sound-absorbing non-woven fabric Black back-applied made of pre-painted aluminum Coil Incombustible coating thickness mm.0.5-0.6 RAL color chart – WOOD LIKE wood effect rough finish – OXIDAL anodized effect brushed finish – ULTRA MATT super matt metallic finish. Sublimation processes, adhesive films, powder paints, photo-imprinting are NOT permitted (thickness, color and finish chosen by the Works Management). Ceilings mounted in lowered support on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK. Incombustible Euroclass A1 with inverted T section. 24-15 mm base (base width chosen by the Works Management) -twist with anti-unhooking snap. Rivets and tabs NOT allowed, exposed covering with pre-painted washable, rot-proof, anti-yellowing aluminum foil, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and Type METALSCREEN ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. Side finishes created following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting, waste and maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24-15xh38x3600-3000 mm exposed cladding in pre-painted aluminum in the standard color White RAL 9003.
Steel Technical Specification Guidelines
Inspectable decorative sound-absorbing false ceiling Type METALSCREEN TRIPLEX/2-VT9-VT15-SK LAY-IN FINESTRELLA made with semi-recessed ceiling lights module size 600x600xh9 mm with opening size 110×110 mm pass-throughs or with acoustic TNT sound-absorbing non-woven fabric Black back-applied made of steel pre-painted galvanized Coil Coating Incombustible, thickness 0.5 mm. Standard color Sanitas white RAL 9003 – Silver gray RAL 9006. Powder coating and photoimprinting are NOT permitted (thickness, color and finish chosen by the Works Management). The ceiling lights will be mounted in a lowered position on a 600×600 mm reticular load-bearing structure. Type METALSCREEN TWIN LOCK Incombustible Euroclass A1 with inverted T section base 24 – 15 mm (base width chosen by the Works Management) x h38 on all steel components galvanized single anti-torsion body with anti-unhooking snap. Rivets and attached tabs NOT allowed. covered in
view with pre-painted aluminum foil, washable, rot-proof, anti-yellowing, 100% humidity and salt corrosion resistance, lead-chrome free, standard colour. The false ceiling system will be lowered from the existing floor using rigid galvanized steel rods with a diameter of 4 mm and type METALSCREEN 23/D ULTRAFLEX ultra-flexible double metal spring with anti-corrosion treatment for millimetric suspension adjustment. The side finishes are made following the indications of the Works Management with compensation bands in coated plaster to avoid manual cutting and waste and maintain a symmetrical 600×600 mm module delimited by an inverted T profile 24-15xh38x3600-3000 mm exposed clad in colored pre-painted aluminium. standard White RAL 9003.
Perforation soundproof
Sound proof acoustical micro-perforations for tiles and panels
The noise is a sinusoidal wave that breaks down against the perforated surface of the ceiling and is then muffled by the single-body acoustic membrane that holds it and releases it weakened.
Sound-absorbing micro-perforations on the entire surface of the slat and with lateral selvedges.
Hole diameter 2mm – 3mm anti-occlusion with diagonal texture.
Micro-drilling with a diameter of 3 mm is recommended because it avoids the occlusion of the holes due to loss of sound absorption and unhygienic deposits of dirt and dark circles that no one will clean due to dust granules circulating in the air.
Black sound-absorbing acoustic non-woven fabric uniformly applied with an automated process on the back of each individual slat.
The noise is a sine wave that breaks and breaks down against the perforated surface of the slat and is then muffled by the single-body acoustic membrane, holds it and releases it weakened.
TNT is a new microfibre with a non-vitreous textile structure with very high sound-absorbing properties, it does not disperse harmful fibers in the air, it does not fall apart and decompose over time. It is supplied already applied to the back of the ceiling or slat, eliminating further additional installation, transport and storage costs that usually affect the supply of insulating materials. It always guarantees the presence even after inspection, maintenance and repositioning of every single ceiling or panel in the false ceiling.
NO dusting NO glassy needled NO pollution such as the release of harmful volatile micro-fibres into the air caused by mineral fiber panels, glass wool, rock wool etc. which are inhaled daily
Colors and finishes
STANDARD Standard Gloss Opaque Colors
Pre-painted aluminum Coil Coating alloy 3105-h46-48 Incombustible Euroclass A1 washable rot-proof anti-yellowing 100% humidity and corrosion resistance chrome-lead free 100% recyclable 85% recycled content.
Standard colors gloss matt.
NO sublimated – NO harmful powder coatings – NO photo-imprinting – NO adhesive films
Pre-painted galvanized steel Fireproof Euroclass A1 available standard colors Sanitas White RAL 9003 – Silver Gray RAL 9006
For availability information per ceilings type, item, thickness, minimum order quantity you can contact our sales offices. Special finishes and custom colors for projects are available upon request. Print colors may vary from the original.
WOOD LIKE
Rough wood effect finish
The new trend in architectural components: warm and precious aesthetic value given by the wood effect with rough finish in a wide range of natural colors
Pre-painted aluminum Coil Coating for internal and external application. Incombustible Euroclass A1
UV ray resistance, washable, rot-proof, 100% humidity and corrosion resistance, salt spray, lead-chrome free.
NO sublimated – NO harmful powder coatings – NO photo-imprinting – NO adhesive films
Compared to wood it is incombustible in Euroclass A1 (formerly Class 0) without fire load it is light, UV ray resistant, it is not hygroscopic, it does not deform, it does not stain, it does not change color, no dark spots appear
For availability information per ceilings type, item, thickness, minimum order quantity you can contact our sales offices. Special finishes and custom colors for projects are available upon request. Print colors may vary from the original.
OXIDAL
brushed anodized effect finish
Guaranteed for 20 years
The return to the sobriety and substance of anodized aluminum from the 70s.
Anodized effect brushed finish, this is the most elegant and sober finish in the wide range of natural colors of anodized aluminium.
Pre-painted aluminum Coil Coating for internal and external application fireproof Euroclass A1 UV resistance washable rot-proof 100% humidity and corrosion resistance salt spray lead-chrome free
NO sublimated – NO harmful powder coatings – NO photo-imprinting – NO adhesive films
For availability information per ceilings type, item, thickness, minimum order quantity you can contact our sales offices. Special finishes and custom colors for projects are available upon request. Print colors may vary from the original.
ULTRA MATT
Super matte metallic anti-reflective finish
Our new deep matt high durable coatings offer functionality and outstanding look with the new glamour range of colors. The velvety matt metallic appearance lends ultra matt products perfectly to modern architectural trends. Our ULTRA MATT line is available in low-gloss version. Today, our customers can also choose significantly lower gloss levels from our new products. The ULTRA MATT Polyurethane Polyamide range is ideal for those seeking ultra-matte finishes with gloss as low as 3 U. METALSCREEN ULTRA MATT prepainted aluminium finishes provide the perfect architectural solution. What’s more? All our new coatings for false ceilings and claddings for internal and external applications are highly weather-resistant and boast impressive durability.
Incombustible fire reaction Euroclass A1, washable, rotproof, anti-yellowing, humidity and saltiness corrosion resistant, chrome free.
NO sublimation – NO powder coating – NO photo-imprinting – NO adhesive film
For availability information per ceilings type, item, thickness, minimum order quantity you can contact our sales offices. Special finishes and custom colors for projects are available upon request. Print colors may vary from the original.
RAL
All colors from the RAL chart with matt finish, bright gloss lacquer.
Pre-painted aluminum Coil Coating for internal and external application. Incombustible Euroclass A1
UV ray resistance, washable, rot-proof, 100% humidity and corrosion resistance, salt spray, lead-chrome free.
For availability information per ceilings type, item, thickness, minimum order quantity you can contact our sales offices. Special finishes and custom colors for projects are available upon request. Print colors may vary from the original.